Femto Race LED Quad Kit (40 LEDs & Cables)
Femto Race LED Quad Kit (40 LEDs & Cables)
Regular price
$29.99 USD
Regular price
Sale price
$29.99 USD
Unit price
/
per
Share
FAI LED Kit
Full Kit weighs only 4.5 Grams INSTALLED
-
1x Femto Race LED PDB v2
-
8x Femto Race 4 LEDs
-
8x Femto Race LED wires 60mm
Add integrated BEC and Led controller as well.
See photos for LED controller menu structure.
40 LEDs and only soldering 3 wires? LEDs are even easier to add to your quad. 4x leds per side of quad and 8 per arm. Perfect for international races where LEDs are required.
Quick Setup Guide:
Copy and paste the below text into the CLI of Betaflight. This will turn on your LEDs. You can further adjust in the Betaflight LED Strip tab.
Features:
- 8x Side Fire LEDs, (4 each side)
- Soft Mounting for 20x20
- JST-XSR Connectors for Outputs to each arm.
- Solder pads on bottom of board for extra leds. and backup if connector breaks during crash.
- Supports up to 40 LEDs
- Connect up 8 of the Femto Race LEDs with the FemtoRace Wire kit and add 40 leds to your quad.
Instructions:
Wire 2-6s Input to B+ pad, Wire GND and LED DI to the Flight Controller. Setup betaflight as 1 LED ( All8 on board act as 1 led in parallel, This is better for racing)
Weight:
Femto Race PDB weighs 1.9grams
0.145 grams for 1x 60mm cable w/ heat shrink
0.15 gram For 1 Femto 4 Race LED
Full Kit weighs only 4.5Grams INSTALLED
Wiring:
I = LED data IN
O = LED Data OUT
5 = +5volts
G = GND
Dimensions:
Contains:
-
1x Femto Race LED PDB v2
-
8x Femto Race 4 LEDs
- 10x Femto Race LED wires 60mm (2x Extra Free!!)