3s-6s RGB Lipo Balance Connector LED
Couldn't load pickup availability
Lipo balance connector LED. Using a TPU Strap Mount can add LEDs and secure your balance lead to strap. Selector solder bridges or solder on the included switch to allow easy changes.
You must solder the input voltage being used before power will be applied.
TPU Strap Mount File: TPU Print
1x LED board
1x 7 pin JST-XH header
1x 3 position switch (If selected)
7 colors ( Red, Blue, Green, Yellow, Purple/Pink, Cyan, White)
Voltage: 3-6s (11-27v)
Not switched = -
Switch = |
- Yellow - | |
- White | | |
- Cyan. | - |
- Green - - |
- Blue | - -
- Red. - | -
- Pink/Purple | | -
Warning: LEDs get extremely hot, be very careful when handling your quads with LEDs installed.